Sensors and measuring instruments for capturing electricity, water and gas consumption.
Detailed energy data lead to astounding findings: power guzzlers, load peaks, reactive power and potential savings suddenly become visible. In addition, these data reveal interesting facts about internal processes, the utilization of plants or even defective devices.
With this 1 phase direct measuring device, power consumption, load profiles and peaks can be measured, read directly on the display and transmitted regularly via LoRaWAN to the LineMetrics Cloud. The measuring device is typically hung in the control cabinet in 230V supply lines and directly supplies the power values.
With this 3 phase transducer, power consumption, load profiles and peaks can be measured and transmitted via LoRaWAN regularly to the LineMetrics Cloud. It can be mounted very quickly by a DIN rail in the control cabinet. The necessary current transformers are easily folded over the power lines. A display with intuitive menu guidance allows the setting of different network topologies (1p2w, 3p3w and 3p4w).
Multi-load energy analyzer for single- or three-phase systems for mounting on distribution panel or DIN rail. Manages the power input through two groups of split core current sensors connected via RJ-11 connectors.
The energy meter is perfect for capturing a variety of different readings and can easily be connected to the LineMetrics Cloud via the Modbus RTU interface. The selection of the Modbus registers can be done with a few mouse clicks in the LineMetrics Cloud.
The 3 phase energy analyzer Carlo Gavazzi allows a direct connection up to 65A. The device can be easily connected to the LineMetrics Box via the Modbus RTU interface. The readings to be captured are intuitively selected in the LineMetrics Cloud.
Folding Core AC Converter 5A-500A / 10V
Elpro JC16F5-100VH / JC24F250-VH / JC36F500-VH
With this current transformer, a load curve of a electric consumer can be recorded very easily and conveniently. There are variants of the sensor from 5A to 500A available. The sensor is self-sufficient, therefore requires no external voltage source, provides the measured values in the standard signal (0-10V) and can therefore be connected directly to the sensor adapter or the LineMetrics Box. The output is protected against overloading.
The sensor collects S0 pulses from measuring devices and transmits them to the LineMetrics Cloud via LoRaWAN. Thus, a wide variety of existing systems can be connected, for example, electricity, water or gas meters.
Water Counter | LoRa
This sensor measures the water flow and transmits the values via LoRaWAN to the LineMetrics Cloud. In addition to the actual consumption, leaks can be identified. An alert is possible if a defined flow rate is exceeded or leaks, attempted fraud and disassembly is detected. The battery life is up to 10 years (8 messages daily) and the case is IP68 protected.
Wireless S0 Sensor for Water, Electricity & Gas
The pulse counter captures data from impulse-giving devices or systems and transmits them to the LineMetrics Box via a mesh network. Thus, a wide variety of existing systems can be connected, for example, electricity, water or gas meters.
This energy meter is ideal for temporary power metering and energy metering. It can be switched at any time flexibly between socket and individual consumers. The transmission of the energy data to the LineMetrics Cloud takes place via LoRa. Every 24 hours a status message is sent.
A selection of tested sensors that work reliably.
100% Plug & Play
Simply activate sensors and the data is transmitted immediately.